Overview:
The machine is a continuous flow through the drying equipment for the permeability of good sheet, strip, granular material drying, for dehydrated vegetables, Chinese Herbal Pieces and other types of water content is high, the temperature is not allowed to high material is particularly appropriate ; The series dryer with fast drying, high evaporation strength, the advantages of good quality products, dehydrated cake-like paste-like material, subject to granulation or rod-like can be made after drying.
Features:
● The air volume, heating temperature, material residence time and feeding speed can be adjusted to obtain the best drying effect.
● Equipment configuration is flexible, can use the network with the flushing system and material cooling system.
● Most of the air recycling, a high degree of energy conservation.
● Unique air distribution device, so that the hot air distribution is more uniform, to ensure product quality consistency.
● heat source can be steam, thermal oil, electricity or coal (oil) hot stove supporting
principle：
Material by the feeder evenly spread in the mesh belt, mesh belt generally use 12-60 mesh stainless steel wire mesh, driven by the drive in the dryer to move. Dryer consists of several units, each unit of hot air independent cycle, part of the exhaust by a special exhaust fan exhaust, exhaust gas from the control valve, the hot air from the bottom up or down through the material covered with mesh belt to complete the heat and Mass transfer process, take away material moisture. Net with a slow movement, the speed can be adjusted according to the material temperature, drying finished product continuously fall into the receiver. Up and down the cycle unit can be flexibly equipped according to user needs, the number of units can also be selected according to need.
application:
Dehydrated vegetables, granule feed, monosodium glutamate, coconut, organic plastics, synthetic rubber, acrylic fiber, medicine, medicine, small wood products, plastic products, electronic components aging and curing.
Technical Data Sheet:
| 型号 | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-12 | | 单元数 | 4 | 5 | 4 | 5 | 4 | 6 | | 带宽 m | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 | | 干燥段长 m | 8 | 10 | 8 | 12 | 8 | 12 | | 铺料厚 mm | 10～80 | | 使用温度 ℃ | 60～130 | | 蒸汽压力 Mpa | 0.2～0.8 | | 蒸汽耗量kgsteam/kgH2O | 2.2~2.5 | | 干燥强度 kgH2O/h | 6~20kg/m2．h | | 风机总功率 KW | 3.3 | 4.4 | 6.6 | 8.8 | 12 | 16 | | 设备总功率 KW | 4.05 | 5.15 | 7.35 | 9.55 | 13.1 | 17.1 |
Note: part of the design parameters, depending on the material has been adjusted to design prevail. |
