GFG series of efficient boiling dryer

principle：
   Air purification by heating, the induced draft fan from the lower part of the introduction, through the hopper hole plate. In the working room, the stirring and negative pressure to form fluidized, rapid evaporation of water with the exhaust away, the material quickly dry.




application:
● mechanism of screw extrusion particles, rock particles, wet high-speed mixing granulation particles.
● dry medicine, food, feed, chemical and other areas of wet particles and powder materials.
● large particles, small block, sticky block granular materials.
● Konjac, polyacrylamide and other materials when the volume of dry change.



Features:
● The fluidized bed is a circular structure, avoiding dead angle.
● hopper set agitation, to avoid the formation of wet material agglomeration and dry flow.
● The use of dump dump discharge, convenient rapid and complete, can also be designed according to the requirements of automatic feeding system.
● Sealed negative pressure operation, the gas through the filter. Easy to operate, easy to clean, in line with "GMP" requirements of the ideal equipment.
● Drying speed, temperature uniformity, each batch of drying time is generally 20-30 minutes.

 

  技术参数表：

项目		单位	型号
投料		kg	60	100	120	150	200	300	500
风机	风量	m3/h	2361	3488	4000	4901	6032	7800	10800
	风压	mmH2O	594	533	533	679	787	950	950
	功率	kw	7.5	11	15	18.5	22	30	45
搅拌功率		kw	0.55	0.55	0.55	0.55	0.55	1.5	2.2
搅拌转速		r.p.m	11
蒸汽耗量		kg/h	141	170	170	240	282	366	451
操作时间		min	15-30（视物料情况而定）
主机高度	方形	mm	2750	2850	2850	2900	3100	3300	3650
	圆形	mm	2700	2900	2900	2900	3100	3600	3850

Note: part of the design parameters, depending on the material has been adjusted to design prevail.

Next: CT-C series of hot air circulation oven