Features:
● Under the vacuum, the boiling point of the material solution is reduced, so that the heat transfer driving force of the evaporator is increased. Therefore, the heat transfer area of the evaporator can be saved for a certain heat transfer amount.
• Low-pressure steam or waste heat steam can be used as the heat source for the evaporation operation.
• Less heat loss from the evaporator.
● Before disinfection can be carried out in the drying process without any impurities mixed, in line with GMP requirements.
● belong to a static vacuum dryer, so the shape of dry material will not be damaged.
principle:
The so-called vacuum drying, that is, the dry material in a vacuum under the conditions of heating and drying, if the use of vacuum pump suction dehumidification, the drying rate is accelerated.
Note: If using condenser, the solvent in the material can be recovered through the condenser.
Technical Data Sheet:
规格 | YZG-600 | YZG-800 | YZG-1000 | YZG-1400A | FZG-10 | FZG-15 | FZG-20 |
干燥箱内尺寸(mm) | φ600×976 | φ800×1247 | φ1000×1527 | φ1400×2054 | 1500×1060× 1220 | 1500×1400 ×1220 | 1500×1800 ×1220 |
干燥箱外尺寸(mm) | 1135×810× 1020 | 1700×1045× 1335 | 1693×1190× 1500 | 2380×1675× 1920 | 1924×1720 ×1513 | 1513×1924 ×2060 | 1924×2500 × 1513 |
烘架层数 | 4 | 4 | 6 | 8 | 5 | 8 | 12 |
层间距离(mm) | 81 | 82 | 102 | 102 | 122 | 122 | 122 |
烘盘尺寸(mm) | 310×600×45 | 520×410×45 | 520×410×45 | 460×640×45 | 460×640 ×45 | 460×640 ×45 | 460×640 ×45 |
烘盘数 | 4 | 8 | 12 | 32 | 20 | 32 | 48 |
烘架管内使压(Mpa) | ≤0.784 | ≤0.784 | ≤0.784 | ≤0.784 | ≤0.784 | ≤0.784 | ≤0.784 |
烘架使用温度(℃) | 35-150 | 35-150 | 35-150 | 35-150 | 35-150 | 35-150 | 35-150 |
箱内空载真空度(Mpa) | -0.1 | -0.1 | -0.1 | -0.1 | -0.1 | -0.1 | 0.1 |
在-0.1MPa,加热温度110℃ 时,水的汽化率(kg/m2·hr) | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 |
用冷凝器时,真空泵型号、 功率(kw) | 2X-15A 2KW | 2X-30A 3KW | 2X-30A 3KW | 2X-70A 5.5KW | 2X-70A 5.5KW | 2X-70A 5.5KW | 2X-90A 2KW |
不用冷凝器时, 真空泵型号、功率(kw) | SZ-0.5 1.5KW | SZ-1 2.2KW | SZ-1 2.2KW | SZ-1 2.2KW | SZ-2 4KW | SZ-2 4KW | SZ-2 5.5KW |
干燥箱重量(kg) | 250 | 600 | 800 | 1400 | 1400 | 2100 | 3200 |
The above data. For seniors. If any special requirements, the factory to provide design, consulting services.